Using HTC “Artemis” P3300 as GPS receiver with Notebook
OMG …got it working !!!
Here is what i did:
On your PDA
1. Go to BT settings on your device and make it discoverable.
2. Go to COM Ports Tab and create a new incoming port (mine is COM6)
In GPS2Blue
3. set your GPS to 4 (this is your internal GPS port ..see under Start –> Settings–>GPS)
4. enable BT on and set it to the COM you created in step 2.
5. Press Button ON
On your PC
6. Open your Bluetooth settings… i used Microsoft not Widcomm
7. Add a new Device
8. Choose your PDA
9. When this is done click properties on your device and go to the TAB services.
10. Now it will find a serial Port (SPP) ‘Serial Port’ COM 8 (in my case) enable it and press OK.
11. Now go to the TAB Com Ports and press button ADD. Choose your device and choose the Serial port.Now you have connected COM port 8 on your PC to COM Port 6 on your device. The only thing you will have to do is choose COM Port 8 as your GPS port in your application.
- Tnx to Tranzy from xda-developers.org
February 13th, 2007 at 6:46 pm
You’re still using XP? Oh, well…
February 13th, 2007 at 10:49 pm
I see a Dutch screen and a lot of Windows ??
February 15th, 2007 at 4:24 pm
I know … Windows … for my PPC Phone I need it. The Dutch screen is cause the snaps are taken from another post, as I didn’t have time to do the same from my Artemis, meaning taking snapshots and uploading them.
December 21st, 2007 at 1:19 am
can you use usb??
December 21st, 2007 at 1:20 pm
Unfortunately I haven’t tried it with USB, so no info on whether it will or not.